Avaya S8700 - UPS Leds; Telephone Console LEDS

182
Installing the S8700 IP Connect
May 2002
UPS LEDs
The Powerware front panel has the LEDs shown in ‘‘LEDs on Powerware 9125 UPS’’ on page
182:
LEDs on Powerware 9125 UPS
After plugging the UPS in, all the LEDs flash briefly. After a self test, the Normal mode LED
flashes, indicating that the UPS is in Standby mode.
For more information on the LEDs, refer to the UPS user’s guide that comes with the
Powerware 9125 UPS.
Telephone Console LEDS
Telephones and attendant consoles have some alarm LEDs that must be checked out.
Figure notes
1 Normal mode indicator
2 Battery mode indicator
3 Bypass mode indicator
4 Test/Alarm reset button
5 Off button
6 On button
7 Bar graph indicators
8 Alarm indicators
1
2
3
4 5
6
7
8
ledlups KLC 030102