Avaya S8700 - Test Time Division Multiplexing Bus for each Port Network

193
Installing the S8700 IP Connect
May 2002
Sample Test Results for Expansion Interface Board 2A01—S8700 Multi-Connect
Test Time Division Multiplexing Bus for Each Port
Network
Check each TDM bus for each Port Network (PN) in the configuration.
1 Type test tdm port-network 1 and press Enter.
2 Verify a test results screen similar to ‘‘Sample Test Results for TDM Bus Port Network
1’’ on page 193 is displayed.
3 If result is FAIL for any test, check the connectors of the TDM bus cables in PN 2.
4 Repeat these steps for each PN to check the TDM bus cables.
Sample Test Results for TDM Bus Port Network 1
TEST RESULTS
Port Maintenance Name Alt. Name Test No. Result Error Code
02A01 EXP-INTF 237 PASS
02A01 EXP-INTF 238 PASS
02A01 EXP-INTF 240 PASS
02A01 EXP-INTF 241 PASS
02A01 EXP-INTF 244 PASS
02A01 EXP-INTF 316 PASS
test tdm port-network 1
TEST RESULTS
Port Maintenance Name Alt. Name Test No. Result Error Code
PN 01A TDM-BUS 294 PASS
PN 01A TDM-BUS 296 PASS
PN 01A TDM-BUS 297 ABORT 1005
PN 01B TDM-BUS 294 PASS
PN 01B TDM-BUS 296 ABORT 1005
PN 01B TDM-BUS 297 PASS