Avaya S8700 - Release Busied out Server; View Alarms; Register the System

170
Installing the S8700 IP Connect
May 2002
NOTE:
Customer’s may want to back up using another method.
5 Select Local PC card as the backup method.
6 Click Backup now to back up all data to the PCMCIA flashcard.
Release Busied Out Server
1 Disconnect from the active server and reconnect to the standby server.
2 Under Server, click Release Server to release the standby server from busyout mode.
3 Under Server, click View Summary Status to verify that the server is no longer in
busyout mode and verify the health of both media servers.
View Alarms
The following administration is done on a computer used to access the active media server
using the S8700 Media Server Web Interface.
1 Click View Current Alarms to clear and set alarms.
Register the System
1 Follow existing process and procedures to register the Avaya™ S8700 Media Server for
IP Connect Configurations.