165
Installing the S8700 IP Connect
May 2002
LED display showing that the IPSI has a static IP address
15 Type quit to logoff the IPSI.
NOTE:
Control network settings (IP address, subnet mask, and gateway) will be placed into effect
when the user exits the IPADMIN session.
16 Disconnect the laptop from the faceplate.
NOTE:
Always use the arp -d 192.11.13.6 command (step 4) to clear the ARP cache on the laptop
before connecting to another IPSI. If the cache is not cleared the laptop will appear to hang
and will not connect to the next IPSI.
17 Repeat for each IPSI circuit pack.
CLK
S
E
R
V
fpdlled1 LJK 022502
To Next Page
Loading...
