6
Installing the S8700 IP Connect
May 2002
• Installing the Avaya G600 Media Gateway 39
Check Customer’s Order 41
Unpack and Inspect the Avaya G600 Media Gateway 41
Check Circuit Packs 43
Correct Shipping Errors 45
Set the Carrier Address ID 45
Mount the Avaya G600 Media Gateway in the Rack 47
Mount Two to Four Media Gateways 51
Check AC Power and Ground for Avaya G600 52
Check AC Power 53
Approved grounds 53
Approved floor grounds 54
Uninterruptible Power Supply 55
Media Gateway Power Switch 55
Connect Media Gateway Grounds and Other Grounds 56
Install Coupled Bonding Conductor 58
Connect the Power Cords 58
• Cabling the Media Gateways 59
Cabling Multiple Media Gateways 59
Cabling 2 Media Gateways 60
Cabling 3 Media Gateways 63
Cabling 4 Media Gateways 63
Install Circuit Pack Adapters 64
Connecting Media Gateways to the Phone Network 65
Installing Main Distribution Frame (MDF) Hardware 65
MDF Cross-Connect Fields 67
Main Distribution Frame 67
Main Distribution Frame Labels 69
Install Patch Panels 70
Install Equipment Room Hardware for Avaya G600 71
Cross-connect the Media Gateway to the Patch Panels 71
Allowable Circuit Packs 72
Non-Allowable Circuit Packs 74
Circuit Pack Installation 76
Circuit Pack Slot Loading 76
Off-premises Circuit Protection 80
Install Sneak Fuse Panels 80
Set Ringing Option for Avaya G600 83
To Next Page
Loading...
