Avocent MERGEPOINT SP MANAGER User Manual

To turn LED indicators on or off for all SPs in a group:
1. Click SP - Group.
2. Select the group(s) you wish to modify and click the desired indicator state.
- or -
Click a group name from the explorer tree in the side navigation bar, click Action in
the top navigation bar, then click the desired indicator state.
To set the time for all SPs in a group:
1. Click SP - Group.
2. Select the group(s) you wish to modify and click Set Time.
- or -
Click a group name from the explorer tree in the side navigation bar, click Action in
the top navigation bar, then click Set Time.
3. To synchronize the SPs with the MergePoint SP manager time clock, select Synchronize
with Appliance.
-or-
To synchronize the SPs with the client PC time clock, select Synchronize with Client
PC.
-or-
To specify the time, select Other and select the time from the pop-up calendar.
4. Click Apply.
To change the PET alert settings for all SPs in a group:
1. Click SP - Group.
2. In the Group list, select the group(s) you wish to modify and click PET Setting.
- or -
Click a group name from the explorer tree in the side navigation bar, click Action in
the top navigation bar, then click PET Setting.
3. Perform any of the following steps:
a. Enable or disable Send Alerts. Enabling this function allows the BMC to send alerts
when events occur.
b. In the Community String field, type the value that will be displayed in the PET trap
community string field.
54 MergePoint® SP Manager Installer/User Guide

Avocent MERGEPOINT SP MANAGER Specifications

General

Brand	Avocent
Model	MERGEPOINT SP MANAGER
Category	Network Hardware
Language	English