Avocent MERGEPOINT SP MANAGER User Manual

2. Click the System Sessions tab.
3. In the top navigation bar, click Sessions.
4. In the SoL Session panel, click SoL Session History to display all the commands entered in
SoL mode and theiroutput.
NOTE: Dell DRAC/MC SPs and iDRAC blade SPs do not support SoL session history.
NOTE: To save the SoL session history on the network file system, see NFS on page 74.
To replay SoL:
1. In the side navigation bar, click an SP name.
2. Click the System Sessions tab.
3. In the top navigation bar, click Sessions.
4. In the SoL Session panel, click SoL Sessions Replay to replay SoL actions and results,
including the BIOS result. Click and drag the speed bar to control replay speed.
SP Console Sessions
You can open an SP console session to the selected SP.
To start an SP console session:
1. In the side navigation bar, click an SP name.
2. Click the System Sessions tab.
3. In the top navigation bar, click Sessions.
4. In the SP Console Session panel, click SP Console Session to open the SP console window
through a MindTerm client. After connecting to the service processor console session, you
can run any corresponding service processor console commands.
Telnet Sessions
You can open a Telnet session to the selected SP.
To start a Telnet session:
1. In the side navigation bar, click an SP name.
2. Click the System Sessions tab.
3. In the top navigation bar, click Sessions.
82 MergePoint® SP Manager Installer/User Guide

Avocent MERGEPOINT SP MANAGER Specifications

General

Brand	Avocent
Model	MERGEPOINT SP MANAGER
Category	Network Hardware
Language	English