Avocent MERGEPOINT SP MANAGER User Manual

• Chassis Manager Profile
• Alarm Device Profile
• Indicator LED Profile
• DHCP Client Profile
• DNS Client Profile
• Simply Identity Management Profile
• Role Based Authorization Profile
• Software Inventory Profile
• Software Update Profile
• Indications Profile
• Host LAN Network Port Profile
• CPU Profile
• System Memory Profile
For a complete list of supported service processors, see the MergePoint SP manager release
notes.
Terms
This section defines CLP-specific terms used in this guide.
The CLP specifies the syntax and semantics used to manipulate managed elements (MEs),
which are specified as Targets in CLP commands. See Targets on page 154 for the managed
elements supported by the MergePoint SP manager.
The CLP command response protocol allows a text command message to be transmitted from
the client over the transport protocol to the Manageability Access Point (MAP), which in this
implementation is within the MergePoint SP manager. The MAP receives the command,
processes it and sends a response back to the client.
Users can specify one of three output formats that are supported in the MergePoint SP manager:
text, clpxml and keyword. The text format is the default. The other two output formats are
structured to support automatic parsing by customer-created scripts: clpxml output is in XML
format; keyword output is in the form of keyword/value pairs separated with the end-of-line
characters.
The CLP targets are structured in a tree format with the root node /admin1 at the top and the
map1 node representing the MAP itself. Within the MAP, systems are represented as individual
152 MergePoint® SP Manager Installer/User Guide

Avocent MERGEPOINT SP MANAGER Specifications

General

Brand	Avocent
Model	MERGEPOINT SP MANAGER
Category	Network Hardware
Language	English