Avocent MERGEPOINT SP MANAGER User Manual

Click Remove User next to the user you wish to remove.
NOTE: The line of the removed user will not disappear from the user list. Instead, it will become a user without a
username that has Guest user privilege (no matter which user privilege it had before).
Configuring the MergePoint SP Manager System Settings
(Admin Users Only)
To change the MergePoint SP manager alias:
1. Click System - Setting.
2. In the Alias field, type the new name for the MergePoint SP manager and click Apply.
To set target BMC time (for IPMI SPs only):
1. In the side navigation bar, click an SP name.
2. Click the Configuration tab.
3. In the top navigation bar, select Time. The Set Time window appears.
4. To synchronize the BMC time with the appliance time clock, select Sync with Appliance.
-or-
To synchronize the BMC time with the console time clock, select Sync with Client PC.
-or-
To specify the BMC time, select Other and select the time from the pop-up calendar.
5. Click Apply.
To set the session time interval and SoL history size:
1. Click System - Advanced Setting.
2. Input the desired settings in the fields provided and click Apply.
NOTE: The minimum session time interval is 600 seconds (10 minutes) and the maximum is 18,000 seconds (5
hours). The maximum SoL buffer size is 2 GB.
To set the MergePoint SP manager time:
1. Click System - Advanced Setting.
2. Select Synchronize with Client PC to synchronize the MergePoint SP manager time with
the client PC.
- or -
Select Other and specify the MergePoint SP manager time from the pop-up calendar.
3. Click Apply.
46 MergePoint® SP Manager Installer/User Guide

Avocent MERGEPOINT SP MANAGER Specifications

General

Brand	Avocent
Model	MERGEPOINT SP MANAGER
Category	Network Hardware
Language	English