Avocent MERGEPOINT SP MANAGER User Manual

2. In the top navigation bar, click Authentication Services. The Authentication Service
Configuration window appears.
3. Select Radius from the Authentication Method drop-down menu.
4. In the First Authentication Server field, type the IP address of the first or only
authentication server.
5. In the Second Authentication Server field, type the IP address of a second authentication
server (if available)
6. In the First Accounting Server field, type the IP address of the first or only accounting
server.
7. In the Second Accounting Server field, type the IP address of a second accounting server (if
available)
8. In the Secret field, type the secret.
9. In the Timeout field, type one or more time-out values.
10. In the Retries field, type a number of retries.
11. Click Apply.
Configuring an SMB Authentication Server
You need to configure an SMB authentication server when the MergePoint SP manager is to
use the SMB authentication method or any of its variations (Local/SMB, SMB/Local or SMB
Down/Local).
To configure an SMB authentication server:
1. Click the Users tab.
2. In the top navigation bar, click Authentication Services. The Authentication Service
Configuration window appears.
3. Select SMB from the Authentication Method drop-down menu.
4. In the Domain field, type the SMB domain name.
5. In the Primary Domain Controller field, type the IP address of the primary domain
controller.
6. In the Secondary Domain Controller field, type the IP address of the secondary domain
controller.
7. Click Apply.
Chapter 5: Configuring External Authentication Services 99

Avocent MERGEPOINT SP MANAGER Specifications

General

Brand	Avocent
Model	MERGEPOINT SP MANAGER
Category	Network Hardware
Language	English