Avocent MERGEPOINT SP MANAGER

wsman put http://sblim.sf.net/wbem/wscim/1/cim-schema/2/AvctMP_
DiscoverySAP?SystemCreationClassName="AvctMP_
ComputerSystem",SystemName="MergePoint5300",CreationClassName="AvctMP_
DiscoverySAP",Name="OEM Avocent Discovery Service Access Point 1" -h
<appliance_IPaddress> -u <username> -p <password> -y basic -k
oemavocent_startmode="manual"
To start the discovery on search range #1:
Enter the following command:
wsman invoke http://sblim.sf.net/wbem/wscim/1/cim-schema/2/AvctMP_
DiscoverySAP?SystemCreationClassName="AvctMP_
ComputerSystem",SystemName="MergePoint5300",CreationClassName="AvctMP_
DiscoverySAP",Name="OEM Avocent Discovery Service Access Point 1" -h
<appliance_IPaddress> -u <username> -p <password> -y basic -a start
To stop the discovery on search range #2:
Enter the following command:
wsman invoke http://sblim.sf.net/wbem/wscim/1/cim-schema/2/AvctMP_
DiscoverySAP?SystemCreationClassName="AvctMP_
ComputerSystem",SystemName="MergePoint5300",CreationClassName="AvctMP_
DiscoverySAP",Name="OEM Avocent Discovery Service Access Point 2" -h
<appliance_IPaddress> -u <username> -p <password> -y basic -a stop
NOTE: If the automatic discovery is already stopped, then the return value is 2.
Power Management
AvctMP_PowerManagementService
This class controls the power state of the MergePoint SP manager. It inherits from CIM_
PowerManagementService.
AvctMP_PowerManagementCapabilities
This class defines the supported capabilities of the MergePoint SP manager power management
service. It inherits from CIM_PowerManagementCapabilities.
AvctMP_AssociatedPowerManagementService
This class defines the association between a management service and the service processor. It
inherits from CIM_AssociatedPowerManagementService.
AvctRT_PowerManagementService
This class controls the power state of connected service processors. It inherits from CIM_
PowerManagementService.
176 MergePoint® SP Manager Installer/User Guide