Avocent MERGEPOINT SP MANAGER User Manual

Using SMASH Command Line
Protocol
8
149
The command line management option described in this chapter is based on the System
Management Architecture for Server Hardware (SMASH) Command Line Protocol (CLP)
specification developed by the Distributed Management Task Force (DMTF).
NOTE: The information in this chapter applies only to the MergePoint SP53xx manager.
SMASH CLP is an alternative to the web interface or CLI. This chapter provides information
needed by users and administrators either to execute individual commands on the command line
or to create scripts to automate management of managed servers.
Commands or scripts can be executed over either a Telnet or Secure Shell (SSH) version 2 session
launched from a remote computer to the MergePoint SP manager. SSHv2 is recommended as a
more secure access method than Telnet because it is encrypted.
The commands can be used to do the following:
• Perform some types of configuration, such as changing passwords on already-existing user
accounts, and changing configuration of already-added devices that are managed by the
MergePoint SP manager.
• Perform tasks using service processor capabilities on managed servers, such as controlling
power, monitoring sensors and system events, and accessing the system console either at the
level of the server’s operating system or its BIOS.
The MergePoint SP manager is the industry’s first management appliance to implement a
command line management option that is based on and conforms to the CLP specification. This
chapter introduces the SMASH CLP specification and describes the subset of the SMASH CLP
commands that are provided on the MergePoint SP manager.
NOTE: Visit http://www.dmtf.org for the SMASH/CLP specification for more information about the SMASHCLP
specification.

Avocent MERGEPOINT SP MANAGER Specifications

General

Brand	Avocent
Model	MERGEPOINT SP MANAGER
Category	Network Hardware
Language	English