Balluff BVS HS-P Series User Manual

289
www.balluff.com
7
Appendix C: Standard Defaults
Balluff BVS HS-P Family
Industrial Handheld Barcode Readers
Stand Mode Indication Disable 78
Pick Mode Disable 78
Stand Mode Sensitivity Medium 79
Stand Mode Illumination Off Time 2 Seconds 79
Reading Active Time 5 Seconds 80
Stand Illumination Control OFF 80
Flash On Time
10 = Flash is ON for
1 Second
81
Flash Off Time
06 = Flash is OFF
for 600ms
81
Aiming Pointer Enable 82
Aiming Duration Timer
Aiming Off
After Decoding
82
Green Spot Duration 300 ms 83
Partial Label Reading Control Enable 83
Decode Negative Labels Disable 84
Multiple Label Reading
Multiple Labels per Frame Disable 85
Multiple Labels Ordering by Code Sym-
bology
Random Order 85
Multiple Labels Ordering by Code
Length
Disable 86
CODE SELECTION - 1D SYMBOLOGIES
Code EAN/UPC
Coupon Control
Enable only UPCA
coupon decoding
89
UPC-A
UPC-A Enable/Disable Enable 90
UPC-A Check Character Transmission Send 90
Expand UPC-A to EAN-13 Don’t Expand 91
UPC-A Number System Character
Transmission
Transmit 91
UPC-A 2D Component
2D Component Not
Required
91
Parameter Default Your Setting
Page
Number

Balluff BVS HS-P Series Specifications

General

Brand	Balluff
Model	BVS HS-P Series
Category	Barcode Reader
Language	English