Barco ClickShare Installation Guide

6. Web Interface
The content of the P assw ord tab is displayed.
Image 6-58
Password
3. Enter the old password (3).
4. Enter the new password (4).
5. To confirm, enter the new password a second time (5).
6. Click Apply.
The adm inistrator password is changed.
6.36 Integrator password
About the integrator password
When an integrator wants to access the ClickShar e Base Unit v ia API c omm ands a typical pa ssword can be r equired. This password
can be changed at any time by the administrator of the ClickShare Base Unit.
To change the integrator password
1. Log in t o the ClickShare web interface.
2. Click the Maintenance tab (1) and then click Password (2)..
88
R5900004 CLICKSHARE 23/12/2014

Barco ClickShare Specifications

General

Plug-and-Play	Yes
Video Outputs	HDMI
Supported Resolutions	Up to 4K UHD
Number of Concurrent Users	Up to 8 (depending on the specific model)
Operating System Compatibility	Windows, macOS
Security Protocols	WPA2
Maximum Resolution	3840x2160
Connection	USB
Encryption	AES
Supported Video Formats	H.264
Wireless Technology	Wi-Fi