4. ClickShare installation
European version
Type C and type G
Japanese version Typ e A
Chinese version Typ e I CCC
North America n version Type A
2. To pow er on the unit, set the rocker switch to “1”.
If the B ase unit does not start up automatically, use the standby button.
The standby button at the front c an now fully control the unit.
Image 4-12
Standby button
The standby button has the following functions:
- When the sy stem is awak e, a short push triggers the system to go into standby mode.
- When the system is in standby m ode, a short pus h triggers the system to wake up.
- When the system is power ed on, a long push causes the system to shut down and p ower off.
- When the system is shut down, a long push or short push triggers the system to start up.
4.11 Connecting an iOS device
The o ptional Hardware add -on ClickShare Link is need ed to conn ect an iO S device.
About an iOS dev ice connection
The ClickShare Link allows users to get the c ontent from an iOS device touchscreen to the large meeting room screen. T he iOS
device behaves like an additional laptop. Note that the ClickShare Link only streams video, sound is not supported.
The ClickShare Link is t o be attached to the (rear) USB port of the ClickShare Base Unit.
For the iO S device itself, there are two ways to connect to the ClickShare Link:
• Cable connection, requires an HDMI adapter for iO S device.
• Wireless, requires an Apple TV. AirPlay needs to be activated on the iOS device.
R5900004 CLICKSHARE 23/12/2014
27
To Next Page
Loading...
Need help?
General
