6. Web Interface
Image 6-40
Enable A PI
6.25 Advanced settings: NTP setup
About NTP
NTP (network time protocol) allows to synchronize clock on a network. By using NTP, the internal c lock of the Base unit can be
synchronized w ith a NTP server on the network. This synchronization is ne cessary when using HTT PS and corporate network
integration.
How to setup
1. Log in t o the ClickShare web interface.
2. Click the Setup tab (1) and click Advanced (2).
Image 6-41
3. To enable NTP, check the chec k box next to Enable (3).
4. Fill out the host name or IP address of the NTP server on your network.
5. As a backup, you can fill out the address of a s econd NTP server on the network.
6. Click Apply to start the synchronization.
When synchronized, the stat
us will indicate Synchronized.
76
R5900004 CLICKSHARE 23/12/2014
To Next Page
Loading...
