EasyManuals Logo

Barco ClickShare Installation Guide

Barco ClickShare
114 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #54 background imageLoading...
Page #54 background image
6. Web Interface
2. Browse to the I P address you can nd in the top left c orner of the ClickShare welcome screen.
Note: The Wired IP address is only visible when th e Base Unit is connected to the LAN.
A login screen appears.
3. Enter the user name ’admin’ and the password and click OK.
By default, the password is set to ’admin’.
The web interface opens.
Image 6-1
Web interface, startup screen
The langu age of the web interface can be changed. It contains als o three tabs: Setup, Maintenance and Help .
If you cannot nd t he IP ad dress (e.g. there is no screen available) you should conn ect to the Base Unit
directly w ith yo ur laptop via an E thernet cro ssover cable and access the web interface u sing t he xed IP
address 192.168.1.23. Make sure your own LAN adapter is set in the 192.168.1. range.
To access the Web Interface via a direct connection.
1. Connect the Base Unit to your laptop us ing an Ethernet cable. On some older hardware a crossover cable m ight be needed.
2. On y our laptop, open a browser.
Note: Supported browsers are Internet Explorer, Firefox and Safari.
3. Browse to h
ttp://192.168.1.23.
A login screen appears.
4. Enter the user name ’admin’ and the password and click OK.
By default the password is set to ’admin’.
The web interface opens.
To access the Web Interface via the Base Unit wireless network
1. On your laptop, connect to the Base Unit wireless network.
The default SSID and password to connect to the B ase Unit ar e respectively ’ClickShare-<serial base number>’ and ’clickshare’.
2. On y our laptop, open a browser.
Note: Supported browsers are Internet Explorer, Firefox and Safari.
3. Browse to h
ttp://192.168.2.1.
A login screen appears.
4. Enter the user name ’admin’ and the password and click OK.
By default the password is set to ’admin’.
The web interface opens.
Older laptops do not support the 5 GHz Frequency Band. If y our Base Unit is set to that frequency range,
those devices will not be ab le to connect to the Base Unit via t he wireless n etwork.
42 R5900004 CLICKSHARE 23/12/2014

Table of Contents

Other manuals for Barco ClickShare

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Barco ClickShare and is the answer not in the manual?

Barco ClickShare Specifications

General IconGeneral
Plug-and-PlayYes
Video OutputsHDMI
Supported ResolutionsUp to 4K UHD
Number of Concurrent UsersUp to 8 (depending on the specific model)
Operating System CompatibilityWindows, macOS
Security ProtocolsWPA2
Maximum Resolution3840x2160
ConnectionUSB
EncryptionAES
Supported Video FormatsH.264
Wireless TechnologyWi-Fi

Related product manuals