13. Projector Control
How to set the DMX address
1. Press Menu to activate the menus and select Projector C ontrol → DMX → Address.
Image 13-61
Main menu, projector control
Image 13-62
Projector control, DMX
Image 13-63
DMX, address
2. Press ENTER to select.
Image 13-64
DMX address
3. Use the ▲ or ▼ key to change the s
elected character.
Use the ◄ or ► key to select another character.
Note: Digits can b e entered with the digit keys on the remote control or the local keypad. When a digit is entered in that way,
the next character will be s ele
cted automatically.
R5905032 HDX SERIES 20/11/2014
239
To Next Page
Loading...
