13. Projector Control
Image 13-129
Main menu, projector control
Image 13-130
Projector control, GSM configuration
Image 13-131
GSM configuration
Image 13-132
GSM pincode
2. Select Pin code and press ENTER.
A PIN code input field appears.
Image 13-133
Device configuration, PIN code
3. Enter the 4 digit PIN code corresponding with the mounted SIM card. Use the digit keys on the remote control or the local keypad.
Each digit is replaced by an asterisks.
Press ENTER when the 4 digits are entered.
Image 13-134
4. Select OK and press ENTER to configure the software.
Replacing a SIM card with a new one
1. Before removing the current mounted SIM card, select Projector Control → GSM configuration → GS M pinc ode
260
R5905032 HDX SERIES 20/11/2014
To Next Page
Loading...
