3. Physical installation
2
F
Image 3-39
Right bottom focusing
8. Sharpen top right corner of the screen by adjusting nut 3
3
F
Image 3-40
Corner focusing
9. Repeat from step 6 until the projected focus pattern is as sharp as possible in the center, left, right, top and bottom of the screen.
How to fixtheScheimpflug
Start the fixation as follows (steps must be followed strictly) :
1. Turn in set screw A, B and C. Tighten lightly (by hand).
Tip: Any m ovem ent of the image will affect the Scheimpflug adjustment
2. Fasten lock nuts a, b and c.
3. Turn in set screw D lightly (by hand) allowing the image to move slightly (1/3 to 1/2 of a square).
R5905032 HDX SERIES 20/11/2014
37
To Next Page
Loading...
