Barco MDSC-1119 User Manual

Overview of Commands
MDSC-1119 and MDSC-2124_________________________________________________________________13
• CMD
Sets saturation value
Example: CMD,SAT,50
Response: 50
• RV
Reads the current saturation
Example: RV,SAT
Response: 50
• MM
Returns the maximum saturation
Example: MM,SAT
Response: 200
• Mm
Returns the minimum saturation
Example: Mm,SAT
Response: 0
4.5.4. HUE
Adjusts and gets information about the hue of the display.
Command Minimum to Maximum Hue
CMD 0 - 200
RV
MM
Mm
HUE
• CMD
Sets hue value
Example: CMD,HUE,50
Response: 50
• RV
Reads the current hue
Example: RV,HUE
Response: 50
• MM
Returns the maximum hue
Example: MM,HUE
Response: 200
• Mm
Returns the minimum hue
Example: Mm,HUE
Response: 0

Barco MDSC-1119 Specifications

Display Specifications

technology	TFT Active Matrix LCD
native resolution	1280 x 1024
active screen diagonal	19 inches
active screen area	14.8 x 11.9 inches
pixel pitch	0.294 mm
brightness	300 cd/m2
contrast ratio	700:1
viewing angle	178 degrees

Connectivity and Control

analog video inputs	1x universal 5BNC, VGA (DB15), S-Video (4-pin mini DIN), SDI (BNC)
digital video inputs	DVI-I
communication	RS232 (9-pin D-Sub)

Supported Resolutions and Formats

horizontal scan frequencies	15-100 kHz
vertical scan frequencies	50-120 Hz
bandwidth	165 MHz

Power Requirements

external DC power supply	90-264 VAC
display voltage	20-24 VDC
power consumption	80 Watt max

Physical Characteristics

display dimensions	427 x 356 x 81 mm
display weight	8 kg
mounting	75 & 100mm VESA