Barco MDSC-1119 User Manual

Overview of Commands
MDSC-1119 and MDSC-2124_________________________________________________________________40
Command Image Function
CMD
1 / 2
[1] = 9600
[2] = 19200
[3] = 38400
[4] = 57600
[5] = 115200
RV 1 / 2
MM
Mm
BAUD
• CMD
Sets the RS232 baudrate
Example: CMD,BAUD,3
Response: 3
• RV
Reads the RS232 baudrate
Example: RV,BAUD
Response: 3
• MM
Returns maximum number for the RS232 baudrate
Example: MM,BAUD
Response: 5
• Mm
Returns minimum number for the RS232 baudrate
Example: Mm,BAUD
Response: 1
4.10. Information commands
The following functions retrieve display information as with the Information submenu in
the OSD.
4.10.1. VER
The following command gets version information. It is only a read (RV) command
Command
RV
VER
[1] = Run code version
[2] = Boot code version
[3] = CPLD version
[4] = FPGA1 version
[5] = N/A
[6] = GFX versin
[7] = K5800369 version
[8] = K5800376 version
[9] = N/A
[10] = VESA version

Barco MDSC-1119 Specifications

Display Specifications

technology	TFT Active Matrix LCD
native resolution	1280 x 1024
active screen diagonal	19 inches
active screen area	14.8 x 11.9 inches
pixel pitch	0.294 mm
brightness	300 cd/m2
contrast ratio	700:1
viewing angle	178 degrees

Connectivity and Control

analog video inputs	1x universal 5BNC, VGA (DB15), S-Video (4-pin mini DIN), SDI (BNC)
digital video inputs	DVI-I
communication	RS232 (9-pin D-Sub)

Supported Resolutions and Formats

horizontal scan frequencies	15-100 kHz
vertical scan frequencies	50-120 Hz
bandwidth	165 MHz

Power Requirements

external DC power supply	90-264 VAC
display voltage	20-24 VDC
power consumption	80 Watt max

Physical Characteristics

display dimensions	427 x 356 x 81 mm
display weight	8 kg
mounting	75 & 100mm VESA