Barco MDSC-1119 User Manual

Overview of Commands
MDSC-1119 and MDSC-2124_________________________________________________________________29
[21] = 7000K
[22] = 7500K
[23] = 8000K
[24] = 8500K
[25] = 9000K
[26] = 9300K
[27] = 9500K
[28] = 10000K
RV
MM
Mm
• CMD
Sets color type value
Example: CMD,CTMPV,9
Response: 5000K
• RV
Reads the current color type value
Example: RV,CTMPV
Response: 5000K
• MM
Returns the maximum color type value
Example: MM,CTMPV
Response: 28
• Mm
Returns the minimum color type value
Example: Mm,CTMPV
Response: 1
4.8.5. UCTMP
This command can be used to adjust the user color temperature. When the user color
temperature is changed it will automatically become the active color temperature type.
In other words if the color type is set to native white it will change to user to show the
new values.
Command Red Green Blue
CMD
10 - 1000 10 - 1000 10 - 1000
RV
MM
Mm
CTMPV
• CMD
Sets the user color temp value and writes values to R,G,B gains
Example: CMD,UCTMP,780,200,1000
Response: User:780;200;1000

Barco MDSC-1119 Specifications

Display Specifications

technology	TFT Active Matrix LCD
native resolution	1280 x 1024
active screen diagonal	19 inches
active screen area	14.8 x 11.9 inches
pixel pitch	0.294 mm
brightness	300 cd/m2
contrast ratio	700:1
viewing angle	178 degrees

Connectivity and Control

analog video inputs	1x universal 5BNC, VGA (DB15), S-Video (4-pin mini DIN), SDI (BNC)
digital video inputs	DVI-I
communication	RS232 (9-pin D-Sub)

Supported Resolutions and Formats

horizontal scan frequencies	15-100 kHz
vertical scan frequencies	50-120 Hz
bandwidth	165 MHz

Power Requirements

external DC power supply	90-264 VAC
display voltage	20-24 VDC
power consumption	80 Watt max

Physical Characteristics

display dimensions	427 x 356 x 81 mm
display weight	8 kg
mounting	75 & 100mm VESA