Barco MDSC-1119 User Manual

Overview of Commands
MDSC-1119 and MDSC-2124_________________________________________________________________41
RV
Reads version number
Example: RV,VER,1
Response: Run:V1.07
4.11. Service commands
4.11.1. FRML
This command enables and disables the frame lock mode.
Command
CMD
0 / 1
RV
MM
Mm
FRML
• CMD
Sets the frame lock mode enabled / disabled
Example: CMD,FRML,0
Response: 0
• RV
Reads whether the frame lock mode is enabled / disabled
Example: RV,FRML
Response: 0
• MM
Returns enabled value
Example: MM,FRML
Response: 1
• Mm
Returns disabled value
Example: Mm,FRML
Response: 0
4.11.2. KEYB
This command enables and disables keyboard sound / beep.
Command
CMD
0 / 1
RV
MM
Mm
KEYB

Barco MDSC-1119 Specifications

Display Specifications

technology	TFT Active Matrix LCD
native resolution	1280 x 1024
active screen diagonal	19 inches
active screen area	14.8 x 11.9 inches
pixel pitch	0.294 mm
brightness	300 cd/m2
contrast ratio	700:1
viewing angle	178 degrees

Connectivity and Control

analog video inputs	1x universal 5BNC, VGA (DB15), S-Video (4-pin mini DIN), SDI (BNC)
digital video inputs	DVI-I
communication	RS232 (9-pin D-Sub)

Supported Resolutions and Formats

horizontal scan frequencies	15-100 kHz
vertical scan frequencies	50-120 Hz
bandwidth	165 MHz

Power Requirements

external DC power supply	90-264 VAC
display voltage	20-24 VDC
power consumption	80 Watt max

Physical Characteristics

display dimensions	427 x 356 x 81 mm
display weight	8 kg
mounting	75 & 100mm VESA