Barco MDSC-1119 - BWC Bandwidth Control; BWV Bandwidth Value

Overview of Commands
MDSC-1119 and MDSC-2124_________________________________________________________________44
4.11.6. BWC
This command selects manual or automatic control of bandwidth only available for
certain inputs like VGA.
Command
CMD
[0] = Manual
[1] = Automatic
RV
MM
Mm
BWC
• CMD
Sets bandwidth control
Example: CMD,BWC,0
Response: Manual
• RV
Reads bandwidth control
Example: RV,BWC
Response: Manual
• MM
Returns Automatic value
Example: MM,HDR
Response: 1
• Mm
Returns Manual value
Example: Mm,HDR
Response: 0
4.11.7. BWV
This command selects the amount of bandwidth.
Command
CMD
0 - 170
RV
MM
Mm
BWV
• CMD
Sets bandwidth value
Example: CMD,BWV,100
Response: 100
• RV
Reads bandwidth value
Example: RV,BWC
Response: 100