Barco MDSC-1119 User Manual

Error Checks
MDSC-1119 and MDSC-2124_________________________________________________________________48
5. Error Checks
There are several ASCII string that will be returned when an error occurs.
“Error 1: command type not found”
“Error 2: parameter out of max range”
“Error 3: parameter out of min range”
“Error 4: wrong number of parameters”
“Error 5: wrong parameter”
“Error 6: not a valid parameter”
“Error 7: Invalid PiP Mode”
“Error 8: Not a Profile”
“Error 9: Invalid Profile”
“Error 10: Source Priority Enabled”
“Error 11: Invalid Input”
"Error 12: Select PIP or change scaling"
“Error 13: Profile Off”
“Error 14: Not a Valid Input Number”
“Error 15: Invalid GPIO”
“Error 16: Clampwidth not available”

Barco MDSC-1119 Specifications

Display Specifications

technology	TFT Active Matrix LCD
native resolution	1280 x 1024
active screen diagonal	19 inches
active screen area	14.8 x 11.9 inches
pixel pitch	0.294 mm
brightness	300 cd/m2
contrast ratio	700:1
viewing angle	178 degrees

Connectivity and Control

analog video inputs	1x universal 5BNC, VGA (DB15), S-Video (4-pin mini DIN), SDI (BNC)
digital video inputs	DVI-I
communication	RS232 (9-pin D-Sub)

Supported Resolutions and Formats

horizontal scan frequencies	15-100 kHz
vertical scan frequencies	50-120 Hz
bandwidth	165 MHz

Power Requirements

external DC power supply	90-264 VAC
display voltage	20-24 VDC
power consumption	80 Watt max

Physical Characteristics

display dimensions	427 x 356 x 81 mm
display weight	8 kg
mounting	75 & 100mm VESA