Field Service Manual December 2003
Page 139 of 276
16 Threshold for scan(0-255) : 0
17 Scan window with (mil) : 32000
- position around the drum till where scanning
is possible
18 nominal drum speed (rpks) : 26000
drum speed for exposure
19 Time out (ms) : 60000
- general time-out
20 Rule to winding offset : 530864
- defines the rule to winding offset
will be automatically calculated in LTL
(0 SRCHWO)
21 Diagnostic level : 512
Defines the amount of information on the screen
during initialisation and exposure. I-table
22 Tune diode position (1/6400 mil) : 312124832
defines the position of the carriage in front
of the diode needed for tuning the beams
23 Machine identifier and enabled options: 16844714
- defines the options of the SilverWriter
Is automatically calculated by entering
the options (B-command see later)
24 Not in use
25 Not in use
26 Bplclk freq. (ppi)
Automatic retrieved
To Next Page
Loading...