Field Service Manual December 2003
Page 145 of 276
- SE-mrks : 2048
-RSF drumencoder with 2048 marks. SE-mrks = shaft encoder marks.
- Imperial ruling : Y
-Imperial reading of the measuringscale.
- RSF linear scale : Y (info)
-Linear scale of RSF type
- BMSHFL : N
-bmshfl board present Y or N
- PK240 (40V) : Y
- Mono volt for Comut and Feeder 40V powersupply.
- Auto expose mode : N
-ALWAYS on N
- Enable drumcor : Y or N
-N : if ‘ysiz’ and ‘yoffs’ tables are on zero
-Y : if ‘ysiz’ or ‘yoffs’ are different from zero
- Enable secor : Y
-RSF encoder eccentricity correction. Goes with LTL command ‘secor’.
- Disable skewness : N
- Enable or disable skewness. Parameter 8 and 9.
-Disable shver err. : Y (or N)
-Disabling shutter verify error.
-Shinit each expose : N (or Y)
-Initialising shutter after each expose.
-Enable quadding : Y
To Next Page
Loading...