56-101-01175 Revision H Page | 12
INTRODUCTION
1. PUBLICATION BREAKDOWN
This user instruction manual establishes the standards of operation for the DPS1000 Pitot-
Static Test Set.
Its purpose is to provide sufficient information for the personnel unfamiliar with this unit to
understand it, identify its parts, and operate it in accordance with proper procedures,
operating techniques, precautions and limitations.
Note: The manufacturer has designed this equipment to be safe when operated using the
procedures and instructions detailed in this manual. Do not use this equipment for any
other purpose than that stated, as the protection provided by the equipment may be
impaired.
2. INFORMATION PROVIDED WITH THE TEST SET
In addition to this User Instruction Manual, the Test Set is delivered with the four information
items described below.
A. The identification label, example (Figure 1), located on the front bulkhead of the Test
Set, provides the following information:
Manufacturer Name
Designation of Equipment
Equipment Part Number
Equipment Model Number Equipment Serial Number
Equipment Modification (if applicable) Equipment Options (if applicable)
Figure 1 Identification Label
To Next Page
Loading...
