56-101-01175 Revision H Page | 35
Figure 25 Display Setup: 2-Parameter Format
C. Units - Displayed units
Once the Display Setup has been selected, (Aeronautical, Pressure units or EPR, 4-
parameter or 2-parameter display format) the Units menu choices allow the user to
select the units of measure for the given display parameters selected. For example, for
Aeronautical mode, the available units for ALT are (1) ft or (2) m, depending on the
selection. The corresponding units are: for ROC (1) ft/min or (2) m/min, for CAS (1) kts
or (2) km/h and for RtCAS (1) kts/min or (2) km/h/min. MACHis a dimensionless quantity
that is always displayed as MACH.
Figure 26 Display Units – for Aeronautical Mode
To Next Page
Loading...
