56-101-01175 Revision H Page | 13
B. The Owner's Warranty Registration card (Figure 2), is to be completed by the owner and
returned to Barfield, Inc. within ten (10) days of purchase to ensure automatic update of
printed matter and validation of warranty.
Figure 2 Owner Warranty Registration Card
C. Each new or re-certified unit is delivered with a Certificate that shows the date when the
unit was tested by the manufacturer, its serial number and when the next certification is
due. This certificate confirms that the unit performed according to its design
specifications.
D. The DPS1000 Limited Two Year Warranty can be seen in Figure 3.
3. RECERTIFICATION
A. The Test Set has a one-year recertification requirement. Maintenance required by this
unit must be performed by qualified technicians in a shop equipped with the necessary
tooling and resources. Contact Barfield for Maintenance and Calibration requirements.
B. At the conclusion of the power up initialization the DPS1000 will display the date when it
was “Last Calibrated” in the format of Day–Month-Year and will provide the user with
the number of days remaining before its calibration due date with a statement of “Cal
due” in ### days format.
CAUTION: Recertification by a calibration/repair shop not possessing the necessary
technical knowledge, documentation, special test equipment, tooling and
standards will adversely affect the accuracy/capability of the DPS1000 for
testing the aircraft, including the demanding Reduced Vertical Separation
Minimum (RVSM) accuracy requirement.
4. SOFTWARE UPDATE
A pop up window will appear every six (6) months on the screen reminding the user to
update the software. Press “continue” to proceed with the update. Please, check
Barfield’s website regularly for the latest software updates and releases. Also, sign up
for automatic updates of Barfield ADTS app.
To Next Page
Loading...
