baxter ARENA User Manual

3. Instrument Modes
3. INSTRUMENT MODES
The term "mode" is used in this Instrument to describe a wide
variety of states. This can be confusing unless you understand
these modes both from an operator's perspective and from a service
technician's perspective. Sections 3.1 through 3.3 will address the
modes the Instrument goes through from power on through
treatment, and then shutdown, Section 3.3 addresses certain
options and the associated modes, then Section 3.4 will discuss the
service modes.
3.1 PREPARATION FOR TREATMENT
This series of modes, or states, is summarized in the diagram and
table below. It takes the Instrument from Hard Power On through
Self Test, after which the operator can choose the next activity.
157-1278-910 Rev A 3-3
November 2003

baxter ARENA Specifications

General

Category	Medical Equipment
Power Requirements	100-240 VAC, 50/60 Hz
Manufacturer	Baxter
Capacity	Varies depending on configuration
Connectivity	Ethernet
Dimensions	Varies depending on configuration
Weight	Varies depending on configuration