Arena Service Manual
5.4 CARD CAGE
CAUTIONS
1. Use proper ESD protection when handling or contacting
any ESD sensitive components.
2. Always repackage the removed ROMs or boards in the
original ESD packaging.
The Card Cage houses the electronic boards that will control the
operation of the Instrument.
Single Board
Computer
I/O Controller
UF Controller
Memory Board
4-Comm
(Touch Screen)
Board
BP Controller
Figure 5-11. Card Cage Standard Configuration
The printed circuit boards that are located here are, from left to
right:
• Slot # 1: 4-Comm (Touch Screen) Board
• Slot # 2: Single Board Computer (SBC)
• Slot # 3: None
• Slot # 4: Hemavision Board (optional)
5-16 157-1278-912 Rev A
November 2003
To Next Page
Loading...
