baxter ARENA - Page 51

4. Hydraulic Theory
Figure 4-11. Dialysate Monitoring Manifold
4.2.13.1 Dialysate (Primary) Conductivity Probe/Thermistor
Set
This is one of three conductivity probe sets. The other two are
described in Section 4.2.7.4, "A" Conductivity Probe/Thermistor
Set, and Section 4.2.10.3, "B" Conductivity Probe/Thermistor Set.
Figure 4-12. "Primary" Probe /Thermistor Set
The third conductivity probe/thermistor set is located in the
Dialysate Monitoring Manifold at the outlet of the output pressure
157-1278-893 4-15
January 2004