MX08 Multichannel Weighing System, Technical Manual, Rev. 2.5 Page 49 of 144
The meanings of the annunciater LEDs in operation are given below.
LED
Symbol Name
Pwr Power
MX08 IO not powered. Check power cable.
MX08 IO powered.
Lnk Link Input/output state changed
Err Error
No Error found.
Error: Look at the error table in Section 6.4
Blank Light Flash Blank for 0.3 second
( * ) : Refer to the error table in Section 6.4.
Table 6.1 - Annunciater LEDs
7.2. Electrical Connection
Digital I/O Connections
MX08 IO unit has the input and output connectors on the front of the instrument. Figure 6.2
helps to user to make I/O connections. The outputs are free contact and the inputs are
opto-isolated.
Figure 6.2 - Input / Output connection
To Next Page
Loading...
