BAYKON MX08 - Electrical Connections

MX08 Multichannel Weighing System, Technical Manual, Rev. 2.5 Page 134 of 144
b. Any process data sent is declared not valid and received process data must
be ignored in this state.
c. On 200 ms, off 200 ms.
LINK/Activity LED
LED State
Description
Off
No link.
Green
Link, no traffic.
Green, flashing
Link and traffic.
ERR Error LED
LED State
Description
Off
No error
Red
If the STATUS LED is not red, a non-fata
l error has been
detected.
If the STATUS LED is red, a fatal event was encountered.
14.2. Electrical Connections
Powerlink, RS-232C and power supply terminals are shown in Figure 13.1.
Figure 13.2 - MX08 PL serial interface connections
RS-232C Serial interface
Usage
Used for service port (xFace)
Baud rate
9600 bps
Length and parity
8 bit no parity
Start / Stop bits
1 start bit and 1stop bit
Powerlink interface
Usage
Powerlink interface with PC or PLC