BD BACTEC FX - Partially Seated Stations

5 – Reference
129
5.4.12 Partially Seated Stations
The Partially Seated Stations Report lists all the vials that the instrument believes are partially seated
(not fully inserted in their stations). The report prints in landscape mode. The report provides the
following information:
Header: Selection/Sorting/Reporting Criteria, Hospital Information (if configured), Instrument
Number, Instrument Software Version, Report Title, and Date and Time Printed
Body of Report (columns from left to right): Accession, Patient Name (30 characters), Patient ID,
Sequence, Test*/Protocol, Status*, State (column not labeled, body of report shows: ? for
anonymous, vial icon for current, or blank for removed/pending), Service, Location, TIP/TTD (Time
in Protocol for negatives and manual positives, Time To Detection for positives)
* see Section 11 for reported values
Applicable Selection Criteria:
N/A
See Figure 5-24 for a sample Partially Seated Stations Report.
To print a Partially Seated Stations Report:
1 From the Status display, select the Reports tab to access the Reports menu.
2 Select the desired report in the menu.
3 Select Print to print the report.
NOTE
The Partially Seated Stations Report provides only station
information, not vial information, since the scan is not confirmed by
vial entry.