BD BACTEC™ FX Instrument User’s Manual
84
Maintenance (5.5)
Test Display (5.5.1)
Block/Unblock Stations Display (5.5.2)
Utilities Display (5.5.3)
Upgrade Software (5.5.3.1)
Save DB and Log (5.5.3.2)
Save Log (5.5.3.3)
Reboot (5.5.3.4)
Change Password (5.5.3.5)
BD Utilities (5.5.3.6)
Configuration (5.6)
Lab (5.6.1)
Reports Display (5.6.2)
Instrument Display (5.6.3)
LIS Display (5.6.4)
Time (5.6.5)
5.3 Status Display
The Status display provides general information about system and station status.
The following operations can be initiated from the Status display:
• View System Alerts
• Access Drawer View display
• Access Culture displays
• Access Positive Removal, Negative Removal, Identify Anonymous, or Vial Entry activities for an
open drawer
The following status information is shown:
• Open drawer (highlighted by a green box)
• Instrument number
• Number of positive, negative, anonymous, and available vials/stations, updated dynamically
• Testing status (active/inactive)
• Approximate drawer full status
• Communications status with LIS or BD EpiCenter system
See Figure 5-1 for a sample Status display.
The screen is divided into areas that represent the instrument drawers. The icons within each
represented drawer are grayed out if there are no vials/stations that correspond to the activity. Offline
drawers are not shown on the display.
Added counts for a drawer may total more than 100 stations because a vial or station may be tallied in
more than one area (e.g. a positive anonymous vial counts as 1 anonymous vial and as 1 positive vial).
To Next Page
Loading...
