5 – Reference
131
5.4.13 Pending
The Pending Report lists all the vials that have been logged in at the Culture display but have not been
placed in the instrument yet (orphan demographics). The report prints in landscape mode. The report
provides the following information:
Header: Selection/Sorting/Reporting Criteria, Hospital Information (if configured), Instrument
Number, Instrument Software Version, Report Title, and Date and Time Printed
Body of Report (columns from left to right): Accession, Patient Name (30 characters), Patient ID,
Sequence, Test*/Protocol, Status*, State (column not labeled, body of report shows: ? for
anonymous, vial icon for current, or blank for removed/pending), Service, Location, TIP/TTD (Time
in Protocol for negatives and manual positives, Time To Detection for positives), “was positive”
indicator (plus sign [+] at end of line indicates that a vial that is not currently Positive previously had
a positive result)
* see Section 11 for reported values
Applicable Selection Criteria:
Sort By Report By
See Figure 5-25 for a sample Pending Report.
To print a Pending Report:
1 From the Status display, select the Reports tab to access the Reports menu.
2 Select the desired report in the menu.
3 Select the desired report criteria by selecting the radio button next to the criteria.
Sort By: Choose 1st and 2nd Sort By field of either: Accession, Hospital Service, Media
(alphabetic), Patient ID, Patient Name, Sequence, Start of Protocol, Location, Status, or None.
The default sort order is by Accession, then by Sequence.
Report By: primary selection: None, Media, Hospital Service. If a criteria other than None is
selected, any Media or Hospital Services that have been used in patient/specimen records
appear in the secondary selection field. The default values are All Media and Hospital
Services.
To Next Page
Loading...
