Installation
EL72x138 Version: 3.3
5.4 Positioning of passive Terminals
Note
Hint for positioning of passive terminals in the bus terminal block
EtherCAT Terminals (ELxxxx / ESxxxx), which do not take an active part in data transfer
within the bus terminal block are so called passive terminals. The passive terminals have
no current consumption out of the E-Bus.
To ensure an optimal data transfer, you must not directly string together more than 2 pas-
sive terminals!
Examples for positioning of passive terminals (highlighted)
Fig.27: Correct positioning
Fig.28: Incorrect positioning
To Next Page
Loading...
