Commissioning
EL72x1 53Version: 3.3
Fig.45: EtherCAT device properties(TwinCAT2): click on „Compatible Devices…“ of tab “Adapter”
TwinCAT 3: the properties of the EtherCAT device can be opened by double click on “Device .. (EtherCAT)”
within the Solution Explorer under “I/O”:
After the installation the driver appears activated in the Windows overview for the network interface
(Windows Start → System Properties → Network)
Fig.46: Windows properties of the network interface
A correct setting of the driver could be:
To Next Page
Loading...
Need help?
General
