REMARK : If your SCO machine does not have a graphical interface, you can download
the file by typing in a console :
# wget http://{IP of the Beemo appliance}/exe/setup-sco.tar.Z
2. The installation is now complete. The Data Safe Restore Client is installed in the /usr/local/dsr folder and will be
run when you start up your machine. The client start and stop script is installed in ’/etc/init.d/dsr’.
3.6 Solaris installation
1. Click on the Solaris icon, save the ’setup-solaris.tgz’ file on your Solaris machine. Then in an administrator
console, type the following commands :
# tar -vxzf setup-solaris.tgz
# cd dsr_solaris
# ./install.sh
REMARK : If your Solaris machine does not have a graphical interface, you can download
the file by typing in a console :
# wget http://{IP of the
Beemo appliance}/exe/setup-solaris.tgz
2. The installation is now complete. The Data Safe Restore Client is installed in the /usr/local/dsr folder and will be
run when you start up your machine. The client start and stop script is installed in ’/etc/init.d/dsr’.
3.7 AIX 4.3+ installation
1. Click on the AIX icon, save the ’setup-aix.tgz’ file on your AIX machine from the dialog box displayed. Then in
an administrator console, type the following commands :
# gunzip setup-aix.tgz
# tar -vxf setup-aix.tar
# cd dsr_aix43
# ./dsr -v
The client returns the version number
# ./install.sh
REMARK : If your AIX machine does not have a graphical interface, you can download the
file by typing in a console :
# wget http://{IP of the
Beemo appliance}/exe/setup-aix.tgz
Data Safe Restore User manual Version 3.08 Page 10
To Next Page
Loading...