Benning IT 130 - Appendix B Standard and optional accessories for specific measuring functions

BENNING IT 130 Appendix B – Standard and optional accessories
- 84 -
Appendix B Standard and optional accessories for specific
measuring functions
The table below lists recommended standard and optional accessories required for specific
measurements. Please refer to chapter 3.5 for further information on standard and optional
accessories.
Measuring function Appropriate accessories (accessories with item no. are optional)
Insulating resistance  universal three-wire test cable
 "Commander" test probe (switchable by means of
"TEST" key)
Low-impedance resistance
Continuity test
 universal three-wire test cable
 "Commander" test probe (switchable by means of
"TEST" key)
 40 m measuring line BENNING TA 5 (044039)
Line impedance
(voltage drop)
Loop impedance
 universal three-wire test cable
 test cable with shock-proof plug
 "Commander" test plug for shock-proof socket
(switchable by means of "TEST" key) (044149)
 "Commander" test probe (switchable by means of
"TEST" key)
RCD testing  universal three-wire test cable
 test cable with shock-proof plug
 "Commander" test plug for shock-proof socket
(switchable by means of "TEST" key) (044149)
Earthing resistance  universal three-wire test cable
 earthing kit consisting of two earth rods, three test
cables (044113)
Phase sequence
(rotary field)
 universal three-wire test cable
 16 A CEE measuring adapter, 5-pin, for voltage / rotary
field measurement (044148)
Voltage, frequency  universal three-wire test cable
 "Commander" test probe (switchable by means of
"TEST" key)
 test cable with shock-proof plug
 "Commander" test plug for shock-proof socket
(switchable by means of "TEST" key) (044149)
Current  AC current clamp adapter BENNING CC 1
for current measurement up to 400 A AC (044037)
 AC current clamp adapter BENNING CC 2
for current measurement up to 20 A AC (044110)
 AC / DC current clamp adapter BENNING CC 3
for current measurement up to 300 A AC / DC (044038)
Luminous intensity  luminous intensity sensor BENNING luxmeter type B
(044111)
Single-fault leakage current
(ISFL) in IT networks
 universal three-wire test cable
 test cable with shock-proof plug
 "Commander" test plug for shock-proof socket
(switchable by means of "TEST" key) (044149)
 "Commander" test probe (switchable by means of
"TEST" key)