INTRODUCTION
About the Control Panel
The full-featured ABSOLUTA security systems have
been especially designed to satisfy all security needs,
from residential to advanced industrial applications.
The objective of the ABSOLUTA is to make end-user
operation simple and help the Installer improve effi
-
ciency. This is achieved by reduced complexity soft
-
ware and firmware, and remote programming and
diagnostic facilities.
This system provides impressive application flexibility
and many interesting features such as monitoring facili
-
ties and telephone access.
The ABSOLUTA range of panels is composed of three
main models based on a common platform.
ABSOLUTA 16 Expandable up to 16 hardwired zones
or 32 wireless zones. This Control Panel is dedicated to
the basic applications for residential and small commer-
cial sectors.
ABSOLUTA 42 Expandable up to 42 hardwired zones.
This panel is dedicated to the middle-high level applica-
tions for the residential sector and to the middle level in-
stallation for the Commercial/Enterprise sector.
ABSOLUTA 104 Expandable up to 104 zones. This
panel is dedicated to the high level applications for the
residential sector and to the middle-high level installa
-
tion for the Commercial/Enterprise sector.
Partitions ABSOLUTA manages independent Parti
-
tions — all with Stay/Away control (8 Partitions for
ABSOLUTA 16 and ABSOLUTA 42; 16 Partitions for
ABSOLUTA 104). Each Partition (group of zones) can
be programmed with its own Entry/Exit and
Auto-Arm/Disarm Times, etc., and can be controlled by
digital Keys/Cards, Codes and/or Input zones.
Events and Actions ABSOLUTA manages about
2000 events. The factory default settings have been
purpose programmed to require few or no changes for
standard applications. However, the programming flexi
-
bility of the Events and Actions (Output, Digital commu
-
nicator and Voice Dialler Actions) will allow you to fully
customize the system.
Communications The Communicator manages 32
telephone numbers for vocal communications and SMS
messages (through the optional GSM Module, the
ABS-GSM) and digital communications to Central Sta
-
tions. Each Communicator number can have its own
Account Code and Reporting format (usually assigned
by the Central station).
3
In order to comply with EN50131 Grade 3 stan
-
dards, it is essential to use the ABS-IP IP module
for the notification of alarms: the built-in PSTN
communicator and GSM/GPRS ABS-GSM Module
can be used simultaneously.
Remote Service The Remote Service makes it possi
-
ble to carry out actions on the Control Panel at a dis
-
tance, without physically operating the components:
basically programming (downloading/uploading op-
tions) and diagnosing Control Panel status.
The Remote Service can be implemented via Internet
using the optional GMS module, ABS-GSM, and/or the
optional IP module, ABS-IP.
Voice Messages The ABSOLUTA manages 206 re-
cordable Voice Messages for the Voice Dialler, and
voice driven menu facilities.
Voice communications to and from the Control Panel al-
low operations such as: Listen-in, 2 Way Audio, Input
status enquiry (with Voice answer); Remote control of
appliances (Turn ON/OFF); Arm/Disarm Partitions;
Alarm Reset and Inhibit Calls.
Access to all the “over-the-phone” features requires a
Telephone Access Code which can be disabled
immediately after use.
Scheduler The Scheduler can be setup to Arm/Disarm
Partitions automatically (on a daily or weekly basis),
and to control 16 daily timer events.
Wireless Devices This Control Panel support up to 32
Wireless Detectors and up to 16 Wireless Keys, by
means of the VRX32-433, VRX32-433EN or
VRX32-868 receivers (optional).
Programming This Control Panel can be programmed
from the Keypad, or via the BOSS Software Application
and a computer. The Software Application (runs under
Windows) provides real-time supervisory facilities (via
connection to a RS232 or USB Interface, or
Teleservice), and will allow you to make the fullest use
of all the system features.
ABSOLUTA INTRODUCTION 5
To Next Page
Loading...
