n
Emails
If this option is ENABLED the Control Panel will send an
e-mail
12
upon the verification (and reset) of the events
belonging to the corresponding group, to the group of
addresses (up to 4) programmed in the Emails Options
Group, on the basis of the relevant Partition for the
event which has verified.
If the event does not belong to any Partition (System
Events) the e-mail will be sent to a group of specific ad
-
dresses.
For example, if the Zone 1 Alarm occurs and Zone 1 be
-
longs to Partitions 1 and 3, the e-mail will be sent to the
addresses defined for Partitions 1 and 3.
The sender of the e-mail will be “noreply@absoluta.info”.
The subject of the e-mail will have the following format:
<Central Header>":"<space><Type of Event>
Where:
Ø
Central Header is Message # 1 - Panel in the SMS
Messages options group.
Ø
Type of Event will be:
— Alarm, for alarm events,
— Tamper, for tamper events,
— Fault, for fault events,
— Generic, for all other events,
— Restore Alarm, for alarm reset events,
— Restore Tamper, for tamper reset events,
— Restore Fault, for fault reset events,
— Restore Generic, for the reset of all other events.
The body of the e-mail will show the information relat-
ing to the event, in the same format as Smart SMS
messages (see “Smart SMS” for further information).
The subject and body of the e-mail may show infor
-
mation for several events, if they occurred within 20
seconds of the first event.
+
To use this function the ABS-IP Module must be in
-
stalled and programmed as outlined in the “IP” section.
Default: Disabled.
n
APP Notification
If this option is ENABLED the Control Panel will send
notification upon the verification (and reset) of the
events belonging to the corresponding group, to the
telephones that have the ABSOLUTA app installed.
+
Users with the ABSOLUTA app installed on their
telephones must enable them to receive notifica
-
tion via the relevant option.
User will receive notification of events relating to their
PIN and the Partitions on which it is enabled in addition
to System Events (if selected).
The Master User (see User Type in the Codes and
Keys > User Options Group) can disable the function to
receive notification for all telephones registered.
When users receive notification they can click on the
relevant icon to see event information: information will
have the same format as the Smart SMS messages
(see “Smart SMS” for further information).
+
To use this function the ABS-IP Module must be in
-
stalled and programmed as outlined in the “IP” section.
Default: disabled.
72 Expandable Hybrid Control Panel
12The Control Panel will send the information to a remote server (server.absoluta.info) via the ABS-IP Module with
128-bit AES encryption; the remote server will create a HTML message with the information received to be
forwarded to the programmed e-mail addresses.
To Next Page
Loading...
