n
System
Panel Prog.
System
The System option is for setting the Control Panel ID
Number, as follows.
1. Press ENTER:
System
Panel ID
2. Press ENTER again: the display shows the current
ID number in the bottom left:
System
0000 : 0/9999
3. Enter the ID number of the Control Panel (0 to
9999) and then press ENTER to confirm or ESC to
cancel and go back in step 1.
n
Key Reader
Panel Prog.
Key Reader KR---
The Key Reader option is for setting the Reader Parti-
tions, as described for zones.
n Keypad
Panel Prog.
KeyPad KP---
The Keypad option is for setting the Keypad Partitions,
as described for the zones.
2.1) Voice Message Recording
You can recording and playback the Voice Messages
by means the Audio Station AS100, as follow.
1. Access the Installer menu, as indicated in the para
-
graph “Access to the operations”.
INSTALLER
1act. 2prg 3view
2. Select the Programming option by pressing 2.
INSTALLER 2.1
Voice Messages
3. Select Voice Messages.
INSTALLER 2.1
Voice Messages
4. Press ENTER.
Message Num. ---
5. Enter the ID number of the Voice Message to re-
cord/playback, then press ENTER. The display up-
per line show the selected message on the right its
status on the left:
Ø Free: the Message is empty;
Ø Used: the Message is already used.
M001 Free
1=> 2=Rec 3=Stop
6. Press 1 to play the message. Press 3 to stop the
playback. A bar on the display upper line shows the
play progress.
Ø
*: the play time.
Ø
=: the Message length.
Ø
-: the free space.
M001 play *==---
1=> 2=Rec 3=Stop
7. Press 2 to record a new message. Press 3 to stop
the recording. A bar on the display upper line shows
the recording progress.
Ø
*: the recording time.
Ø
=: the free space.
M001 rec. *=====
1=> 2=Rec 3=Stop
ABSOLUTA KEYPAD OPERATIONS 97
To Next Page
Loading...
