Arming Schedule
The Arming Schedule option group is to setup the au
-
tomatic arming/disarming of the partitions at specific
times, as follow. To automatic arming/disarming a Parti
-
tion on a specific day, you must:
Ø
enable a Time Table by checking the Enabled op
-
tion;
Ø
setup the time when the Partition requires to be
Armed/Disarmed during the day, by clicking on the
Partitions button of the Time Table;
Ø
Apply the Time Table to the required day by selecting
it on the Perpetual Calendar and by clicking on the
Apply button;
Ø
click on the Enable/Disable button to enable the
Time Table on the selected day;
Ø
enable Auto-Arming (by the Enable Auto Arming
option in the General System Options or by the
Auto-Arm option on the Keypad Mater User Menu).
A
In order to comply with the EN50131-1 and
EN50131-3 standards, if a zone is in alarm during
auto-arming, at default, the Panel inhibits the arm
-
ing, without triggers alarms, and logs in memory the
events and their causes. In addition, the Panel noti
-
fies the arming fail by the Voice Dialler: Automatic
Arming Refused on Partition event enabled.
n Time Table
You can setup up to 20 Time Tables, as follow.
# This is the Time Table ID. Any Time Table is identi-
fied by its ID number (#) and a specific colour. The ID
number and colour are used to identify the Time Table
on the Perpetual Calendar.
Title You can assign a significant name to the Time Table.
Type You can setup Daily and Weekly Time Tables.
Ø
Daily: Daily Time Table applies to the selected days
on the Perpetual Calendar, independently by the day
of the week.
Ø
Weekly: Weekly Time Table applying to the selected
days on the Perpetual Calendar depending on the
day of the week.
+
To setup the Weekly Type you need seven Time
Tables, one for each day of the week, therefore the
application asks you the confirmation for override
the six Time Tables following the one selected.
Edit By Clicking on the Partition button you can setup
the relevant Time Table by means the Partition Event
Editor, as described in the relevant paragraph.
+
The Partition button is active only if the Enabled
box is checked.
Week Day This column shows the week of day that the
Weekly Time Table refers to: MON (Monday); TUE
(Tuesday); WED (Wednesday); THU (Thursday); FRI
(Friday); SAT (Saturday); SUN (Sunday).
Enabled This option let you to enable/disable the Time
Table:
Ø
¨ disabled;
Ø
þ enabled.
Apply By clicking on the Apply button you can apply the
Time Table to the selected days on the Perpetual Calendar.
n
Partitions Event Editor
Each Time Table allow to you set up up to 8 arming
events for each Partition.
For each arming event you can setup the type and the
time when it will occur, as follow.
ARM Select the Action for the Partition:
Ø
Away
Ø
Stay
Ø
Instant Stay
Ø
Disarm
Ø
No Action
Time Set the time when the selected action must occurs.
n
Perpetual Calendar
The Perpetual Calendar (the table on the right side of
the Event Schedule Option Group) is to apply the set
Time Table to the required days, as follow.
Select the required days then click on the Apply button
to apply the relative Time Table:
Ø to select discontinuous interval of days, keep holding
the Ctrl key on the keyboard then click on the re-
quired days.
Ø to select continuos interval of days, click on the first
day of the interval, then keep holding the Shift key on
the keyboard, then click on the last day of the interval.
The colour and the ID number on a day indicate the
Time Table for that day.
By moving the mouse pointer on a specific day, you can
obtain the following information:
Ø
the ID Number of the Time Table applied to that day;
Ø
the Title of the Time Table applied to that day;
Ø
the month of the selected day;
Ø
the number of the selected day;
Ø
the day of the week for the current year and for the
next year.
Select Partition This menu is to select the Partitions to
see on the Perpetual Calendar.
Ø
All partitions: the Perpetual Calendar shows the
Time Table for all Partitions.
Ø
Partition: the Perpetual Calendar shows the Time
Table for the selected Partition.
Enable/Disable This button is to enable/disable the
Scheduler for specific days.
Select the required days on the Perpetual Calendar
then select the Enable/Disable button to change the
Scheduler status:
Ø
the grey background indicates that the Scheduler is
disabled;
Ø
the coloured background indicates that the Sched
-
uler is enabled.
ABSOLUTA PROGRAMMING FROM THE PC 77
To Next Page