The
front
control station is located in the operator's cab next to the
right
con‐
trol station (10).
The travel movements of the machine are controlled using the steering
wheel with steering knob (6), the accelerator pedal (11) and the inching
pedal (12). Additional controls for controlling the travel movements are
located on the
right
control station. The instrument panel/display unit (7)
provides information/warning messages relating to machine operation.
The travel mode for the machine can be stopped immediately in an emer‐
gency using the
EMERGENCY STOP
switch (8). The drive system and the
hydraulic functions of the bodies remain in operation.
The front roller blind (5) is used to protect against dazzle.
The air flow of the cab heater can be directed using the ventilation nozzles
(3).
The machine is prepared for an optional radio (→ 5.4.12). The loudspeaker
preparations (5) for this are located in the roof lining.
By pulling the electrics box cover release lever (10), the maintenance cover
for the electrics box will be unlocked.
The first electrics box battery main switch (12) disconnects the electrics box.
50-020-1011-900_EN
1.0 - © 2/15/2017
123
5 Structure and function
5.2 Technical description of the basic machine (series production equipment)
To Next Page
Loading...
