12.2 Returning to operation
Before the machine is returned to operation, the owner/user must be certain
that the machine is in good working order.
►
Lubricate the complete machine.
►
Check the oil level in the transmission of the travel drive.
►
Check the hydraulic fluid level.
►
Check the coolant level.
►
Check the tensioning in the caterpillar tracks.
►
Check the connections of cables and lines.
►
Switch on the battery main switch.
►
Check the effectiveness of safety devices.
After lengthy periods out of operation, it is recommended that a test run
should be taken, or a procedure according to startup (→ 7).
Further information about returning to operation, see the individual third-
party documentation (→ part 3 of the documentation).
50-020-1011-900_EN
1.0 - © 2/15/2017
273
12 Taking out of operation, putting back into operation and disposal
12.2 Returning to operation
To Next Page
Loading...
