540
7
ON DECK
Studio ti 03312 540-04usa
125
Deploy and retrieve the anchor always by using the electrical control,
after engaging wildcat and capstan.
This latter can be disengaged, both for casting the anchor off in case of
need and for operating the capstan as a warping windlass. This is simply
performed by undoing the clutch located on the barrel, by means of the
lever.
Anchor retrieving
To retrieve the anchor, perform the same operations previously
described in reverse order.
In windy or strong current conditions, start the engines and keep the
foredeck towards the anchor position to avoid the breakage of the hawse.
Once the anchor is retrieved, fasten the chain stopper before resuming
navigation.
S
CAUTION
Do not operate the anchor windlass electrically with the lever in the
capstan housing or in the wildcat cover.
d
DANGER
Do not approach to moving parts to avoid dangers and injuries to
people.
d
DANGER
Danger: when the winch is operating, be extremely cautious of rotating
parts; keep your feet, hands and the remote control cable at safe
distance.
NOTICES
Lock the chain with the stopper before cruising.
To Next Page
Loading...